12/11/19
12/11/19 - Rich D'Ambrosio: Suminagashi dyed bottle stopper
12/11/19 - Rich D'Ambrosio: two poplar platters with casting epoxy and buffed wax finish
12/11/19 - Rich D'Ambrosio: Maple puzzle on plywood base with Danish oil and lacquer finish
12/11/19 - Chris Godfrey: First vase, made from a white birch he planted with his father when he was young. Finished with a "couple of coats of shine juice."
12/11/19 - Kevin Barb: Sapele bottle stoppers with wood burning with salad bowl finsih
12/11/19 - Mike Kross: Vacuum tube Christmas tree ornament
12/11/19 - Mike Kross: part of an upcoming project, ebony finial, finish with EEE and friction polish
12/11/19 - Mike Kross: Vase with shellac finish and 3 stage buffing
12/11/19 - Bob Bernardi: 2X ornaments
12/11/19 - Kevin Barb: demo on "inside-out turning". From left, a 6 piece ornament, a 4 piece ornament, a 3 piece goblet (stem), 4 demo pieces with clamps shown, and a 4 piece wine bottle
12/11/19 - End view of a 6 piece inside-out turning, first stage.
12/11/19 - End view of a 3 piece inside-out turning, first stage.
11/13/19
11/13/19 - Bob Bernardi: Box elder vessel with wood burning
11/13/19 - Bob Bernardi: Pear wood vessel
11/13/19 - Bob Bernardi: Small cherry bowl with black paint
11/13/19 - Harry Mickey: Two bottle stoppers made with the technique demonstrated last month
11/13/19 - Rich D'Ambrosio: Bottle stopper using the technique demonstrated last month
11/13/19 - Rich D'Ambrosio: Bottle stopper with red and yellow alcohol dye and Lichtenberg wood burning
11/13/19 - Rich D'Ambrosio: Spalted bowl (wood from Lou C.)
11/13/19 - Rich D'Ambrosio: Scrap piece of maple and leftover resin
11/13/19 - Rich D'Ambrosio: Celtic knot platter with oak and resin and an ogee shape. (An ogee is a double curve usually with each curve opposing one another like an “S”.)
11/13/19 - Rich D'Ambrosio: Spalted maple ogee platter, buffed with
carnauba wax finish.
11/13/19 - Chris Godfrey: Cherry burl bowl with "shine juice" finish.
11/13/19 - John Moore: Cherry bowl. This is John's FIRST BOWL! Nice job!
11/13/19 - John Moore: Spalted Maple Pen
11/13/19 - John Moore: Cherry Pen
11/13/19 - Kevin Barb: Maple bottle stopper
11/13/19 - Chris Stolicky: Bottle stopper with purple alcohol dye and white liming wax followed by black bison wax.
11/13/19 - Mike Kross: Bell ornament
11/13/19 - Mike Kross: Cherry burl bottle stopper
11/13/19 - Dan Crandell: Oak bowl with two coats of Tung oil
11/13/19 - Dan Crandell: Prototype football piggy bank in foreground with in process bank in the background.
11/13/19 - Wood burning demo: electrode in foreground and re-purposed battery charger in background (C. Stolicky)
11/13/19 - NiCr wire and other utensils for wood burning
11/13/19 - Burnmaster power supply and pen
11/13/19 - Homemade "tip and stroke" board with different power settings (Lou C.)
10/16/19
10/16/19 -
10/16/19 -
10/16/19 -
10/16/19 -
10/16/19 -
10/16/19 -
10/16/19 -
10/16/19 - Dan Crandell: Spalted Maple bowl. Bowl is sanded to 600 grit and coated with 4 coats of minwax
Tung oil
10/16/19 - Dan Crandell: Spalted Maple bowl. Bowl is sanded to 800 grit then sealed with a shellac/BLO/DA mix, then 2 coats of Zinsser shellac
10/16/19 -
10/16/19 - Rich D'Ambrosio: Live edge Cherry bowl with epoxy
10/16/19 - Rich D'Ambrosio: Spalted maple bowl stabilized with epoxy
10/16/19 - Rich D'Ambrosio: Apple bowl. Cracks are filled in with blue pigmented epoxy
10/16/19 - Lou Demo on Bottle Stoppers (Please note the safety gear.)
9/11/19
9/11/19 - Harry Mickey: Cherry Hollow Vessel based off of Trent Bosch's class
9/11/19 - Harry Mickey: Walnut platter
9/11/19 - Harry Mickey: Small Cherry Bowl
9/11/19 - Harry Mickey: Small Maple Bowl
9/11/19 - Rich D'Ambrosio: Seasonally appropriate bottle stopper, will be
Halloween gifts.
9/11/19 - Rich D'Ambrosio: epoxy blank with skull and wood base, getting ready for turning
9/11/19 - Rich D'Ambrosio: epoxy repaired bowl. Had a large crack on the edge, filled it with black epoxy and creatively found a way to worked in some leaves with crushed malachite.
9/11/19 - Rich D'Ambrosio: Buckeye burl coasters with epoxy dragon themed cutouts and glued on cork backing
9/11/19 - Dan Crandell: Live edge bowl (cherry)
9/11/19 - Dan Crandell: slice of burl / small platter
9/11/19 - Chris Stolicky: Red moly burl pen with 5 coats of CA finish. Pen is an EDC pen from Penn State Industries
9/11/19 - Lou Carusone: discussing the process of coring the large burl to get multiple bowl blanks and a platter
9/11/19 - Lou Carusone and Mike Kross: Very Large burl bowl from local burl
9/11/19 - Lou Carusone showed this simple plate stand made by Stan Blanchard
9/11/19 - Lou Carusone: segmented box with wood burning
9/11/19 - Mike Kross: burl bowl
9/11/19 - Mike Kross: burl bowl
9/11/19 - Mike Kross: small plate and hollow vessel
9/11/19 - Mike Kross & Lou Carusone - small burl bowl from the large burl blank & cores
9/11/19 - Mike & Lou - another burl blank, drying (rough turned.)
9/11/19 - Mike or Lou - small platter from the large burl blank
7/10/19
7/10/19 - Don Orr's video hollowing system. All you need is a camera with mounting system, power and a video display.
7/10/19 - Don Orr's video hollowing system showing marking of the tool (on a screen protector) and the red showing the desired wall thickness.
7/10/19 - Marking the desired wall thickness.
7/10/19 -
VIDEO of Don's video hollowing system. Nice demo Don - thanks! (If the link does not work, it may be an issue with your browser. Try another browser, or right-click and save the link locally.)
5/8/19
5/8/19 - Lou Carusone: Ash bowl with butcher block oil finish
5/8/19 - Bob Bernardi: Cedar blank, returned to bring out freshness/scent
5/8/19 - Bob Bernardi: Two buckthorn bowls
5/8/19 - Rich D'Ambrosio: Spalted Maple and Olive Wood box for God-Daughter's First Communion, with
Alumilite Neon Pink and Pearlex inlay
5/8/19 - Rich D'Ambrosio: "firewood bowl" with resin rim
5/8/19 - Rich D'Ambrosio: Large Maple Bowl
5/8/19 - Don Orr: Several pitcher and spout prototypes and the final design
5/8/19 - Don Orr: Solid, single piece walnut pitcher - left a ring at bottom to carve lugs. Bush Oil finish. 3rd place in hollow forms at 2019 Woodworkers Showcase
5/8/19 - Bill Alous: Buckeye burl bowl
5/8/19 - Bill Alous: Ambrosia Maple vase
5/8/19 - Mike Kross: 2X hollow forms (unfinished)
5/8/19 - Mike Kross: Tool handle
5/8/19 - Don Orr: thin sycamore bowl
5/8/19 - Don Orr: Mulberry Vase
4/10/19
4/10/19 - Mike Kross: Spalted bowl
4/10/19 - Lou Carusone: Spalted bowl (repaired)
4/10/19 - Mike Kross: Large segmented bowl from butcher block countertop
4/10/19 - Harry Mickey: Pen
4/10/19 - Dan Crandell: bowl
4/10/19 - Rich D'Ambrosio: Resin bowl with birds and deer...
4/10/19 - Mike Kross: Spalted bowl
4/10/19 - Rich D'Ambrosio: Milliput 2 part epoxy demo
4/10/19 - Rich D'Ambrosio: Mother of Pearl and Alcohol dye Inlay

DA Sander or Dual Action Sander

Pneumatic pencil grinder
3/13/19
3/13/19 - Bob Bernardi: Sapele Handle for Apple Press
3/13/19 - Kevin Barb: Hollow Apple Ornament, cut in half for inspection
3/13/19 - Don Orr: experimenting with new hollowing camera system
3/13/19 - Harry Mickey: 3 pens from some very old pen blanks
3/13/19 - Rich D'Ambrosio: resin ball with burl base. Made with a 4 jaw chuck, a vacuum chuck and a sphere jig. Sanded to 3600 grit with DA sander, then yorkshire grit polishing compound, micro compound , then buffed with white diamond, then carnuba wax.
3/13/19 - Kevin Barb: Experiment in Asymmetry
3/13/19 - Don Orr: Winged Oak Bowl from wood from the “Great Oak” at the Landis Arboretum. This was a 400 year old White Oak that was mostly destroyed by Hurricane Irene.
3/13/19 - Don Orr: Small Oak Bowl from wood from the “Great Oak” at the Landis Arboretum. This was a 400 year old White Oak that was mostly destroyed by Hurricane Irene.
3/13/19 - Don Orr: Wine Bottle Stoppers from wood from the “Great Oak” at the Landis Arboretum. This was a 400 year old White Oak that was mostly destroyed by Hurricane Irene.
3/13/19 - Chris Stolicky: Aluminum Pen
3/13/19 - Lou Carusone: Maple Earing Tree / Rack
3/13/19 - Lou Caruson: Ball and Cup Game
3/13/19 - From the demo on Jam Chucks - easily made from a piece of construction lumber
3/13/19 - A jam chuck design for turning twice turned bowls (after they've dried and warped)
3/13/19 - Jam Chuck in Action
2/13/19
2/13/19 - Bob Bernardi - Maple scraper, in progress
2/13/19 - Bob Bernardi - Walnut scraper, in progress
2/13/19 - Bob Bernardi - apple and cherry shawl pins
2/13/19 - Rich D'Ambrosio - another awesome work of art
2/13/19 - Rich D'Ambrosio -
2/13/19 - Don Orr - wand
2/13/19 - Don Orr - prototype reed and cane handles on ash pitcher #1
2/13/19 - Don Orr - prototype reed and cane handles on ash pitcher #2
2/13/19 - Don Orr - beads of courage bowl from 2x8 pine
2/13/19 - Chris Godfrey - butter nut bowl / change dish
2/13/19 - Kevin Barb - Wine bottle stoppers, some walnut, mostly
Sapele.
2/13/19 - Kevin Barb - Beads of courage bowl (box) (made in 2018)
2/13/19 - Dan Crandell - learning spindle turning and hollowing
2/13/19 - Tonight's topic - chuck maintenance
1/9/19
1/9/19 - Chris Stolicky espresso maker filter holder and handle. Handle is padauk and sapwood
1/9/19 - Chris Stolicky cocobolo filter holder
1/9/19 - Chris Stolicky Mango Pen
1/9/19 - Bob Bernardi - experimentation in texturing with new tool
1/9/19 - Bob's new texturing tool
1/9/19 - Harry Mickey Pens
1/9/19 - Rich D'Ambrosio completed platter from last month
1/9/19 - Chris Godfrey Burl Bowl
1/9/19 - Chris Godfrey returned Maple bowl
1/9/19 - Don Orr - Ash bell Christmas ornament
1/9/19 - Don Orr - fixture for "side hollowed" Christmas ornaments
1/9/19 - Don Orr - side hollowed Christmas ornaments (See John Lucas article in AAW electronic magazine)
1/9/19 - Kevin Barb - 3X bottle stoppers - Maple and Purple Heart, Birch Plywood, Resin
1/9/19 - Mike Kross - Christmas ornament (hollow)
1/9/19 - Mike Kross - let's see what this looks like next month!
1/9/19 - Lou Carusone - another gorgeous segmented bowl.
1/9/19 - Lou Carusone - making of a featuring ring block for his next bowl
1/9/19 - Demonstration of the laser engraver in wood
1/9/19 - Demonstration of the laser engraver in acrylic
1/9/19 - Laser engraver
1/9/19 - Courtney demonstrates the laser engraver
1/9/19 - Laser Engraver in action:
Check out this link to see the laser cutting
through 1/4" poplar
1/9/19 - Result of engraving and cutting
1/9/19 - Completing a platter for Rich's mother with the family crest engraved